**DISCONTINUED** Item No Longer Available (was $1499)
Ken Bar 6hp Intermediate Size Double Seat
Go-Cart Your buddy can go with you on this one...
Great styling is a visual bonus when you
first take a glance, then look inside for
more info and you'll be wanting one of these
D-811 models to play with. The Ken-Bar D-811
Go Cart flashes an Age range of 8-12 years and such fabricating standards (like all
Ken-Bar machines) a baked-on polyurethane
powder coat red high gloss finish and this
model has an adjustable double seat that
slides back & forth to fit smaller to
mid size youths comfortably. A dependable
and powerful Tecumseh 6hp engine with a Centrifugal
Automatic Clutch (no shifting) and a dual
wheel drive and brake system make for traction
& stopping power even in less firm terrain
like wet grass & dirt. Free Helmet and Safety Video included.
Tecumseh power sport 4-cycle, OHV, air cooled,
gas powered engine
Startability easy - pull recoil
capacitor discharge ignition
Horsepower 6 hp
Displacement 195 cc (11.88 cu
Ignition CDI electronic
Governor system quick response
Gas tank no rust poly fuel tank
Exhaust system aluminized large
Two wheel drive live axle unit - two rear
Torque converter: Why a torque
A orque converter will last longer,
all around designed to pull better
terrain than a centrifugal clutch.
6" disc brake for better
and longer lasting
Adjustable double padded sliding seat for
one or two individuals
Finger tip control seat will
slide back and
Distance to peddles 29"
Live axle unit two rear wheels drive
All ball bearing axles and wheels
Top speed 26 mph (approximate)
Heavy duty & smooth heavy
duty #420 final
drive chain ensures smooth power
from the engine to the 1"
Front 15 X 600 X 6
Rear 16 X 650 X 8 - aggressive
Thick-walled steel strong 1" 11 gauge
high quality steel tube
Heavy gauge (thicker) frame most
look the same from the outside,
are major differences.
Ken-Bar frames are made from
duty 11 gauge steel. Many manufacturers
14 or 16 gauge (the higher the
thinner it is), and some even
use 18 gauge.
All jig welded frames for accuracy
Finish baked - on polyurethane
Safety video Included with kart
3 point seat belts (adjustable)
Foam padded brush bars helps
to protect the
occupants against tree limbs.
One free helmet Included with
Width 45 1/2"
Ground clearance 7"
Distance to pedals adjustable
Weight 330 lbs.
RED | GREEN
|Nerf bars beautiful wrap around - will help
offer added protection
Frame bumpers front and rear
Engine stop switch by steering
on side of engine
Metal guard a shield between the seat and
Rear cover with fenders rear heavy gauge
ABS plastic cover guard keeps the go-kKart
occupants cleaner and dryer, as mud or dirt
can "kick up" when karting.
The rear cover adorns the rear of this go
kart. The large rear fenders help keep grass
and dirt away from the driver and passenger.
Side guard side panels help protect
and safety video with every Ken-Bar Go-Cart
Standard features found on all Ken-Bar Go-Carts
All jig welded frames for accuracy!
All ball bearing axles for long
Powder paint for durability and
Seat belts on all vehicles!
Brush Bars standard on all models
Foam covered brush bars on most
Engines by Tecumseh!
Torque converter by Comet!
Clutches by Max-Torq!
? Unit comes 95% pre-assembled. Very minor
assembly only, usually way less than an hour
with normal household tools. Please read
and understand your owners & safety manual,
view your safety video tape (included) and
then get ready for some major fun!
? Speed and range specs are averaged,
ratings & experience may
Warning! Go-Carts & Mini-Bikes can be hazardous
to operate. Failure to understand and follow
Warnings and Instructions for the safe use
and maintenance of this product may result
in Death or Injury! For your safety: Always
wear an approved helmet, eye protection and
protective clothing. Avoid stationary objects
and obstacles that create the potential for
collision. Avoid excessive speed and be particularly
careful on difficult terrain. Never carry
passengers. Never engage in stunt riding,
jumping, or operate the vehicle under the
influence of drugs or alcohol. Go-Carts &
Mini-Bikes are for off road use only! Competent
adult supervision is recommended when children
are operating the vehicle. Check state and
local laws for legal operation. Read Operator?s
Manual and watch Safety Video. Go-Karts R
us assumes no responsibilities or liabilities
from the use or mis-use of this or any of
our listings sold on this site. Use of this
vehicle with age requirements is listed above
in the items listing.
Ken-Bar Go-Carts & Mini-Bikes comply
with all standards for safety and performance
|Ken-bar Manufacturing warrants to the original
purchaser of its Go-Karts or Mini-bike, that
if any part or parts (except engine) prove
to be defective in materials and/or workmanship
within 90 days. Bearing, wheel hubs, rims,
chains, tie rod ends, steering spindles,
throttle and brake pedals, brake drums and
brake bands. No warranty on belts, clutches,
throttle cables, worn out tires, and bent
axles. One year warranty on frame breakage.
Wrecked or abused, no warranty. Phone Ken-bar
Mfg. for authorization to do the repair work.
Retail customer must pay freight charge on
parts to our plant and return.
This warranty does not apply to any part,
which is of the opinion of Ken-bar Mfg. Co.,
that rendered defective due to improper maintenance,
improper assemble, alterations, abuse, negligence
Warranty registration cards must be returned
to Ken-bar. We will not honor a claim unless
the card is mail to us within 10 days of
purchase of Kart or Mini-Bike. Customer must
view video after purchasing vehicle and put
code number at end of video onto the registration
To Order Ken-Bar Parts: You will need to use your breakdown illustration
manual that came with your
(or if you don't have one
your Ken-Bar parts manual
in our Ken-Bar Parts Manual Directory Listing).
Once you have found the
part #(s) you need
within your parts manual...
Method 1 Direct Search: Type the part# into the search box (located
on every page in the left
side boxes) and
then hit Enter on your
keyboard (or click
on the icon next to the
search box). This
will bring up the part
or if more than one
part starts with that string,
a choice will
be displayed. Click on
the part (link) you
need and a "Add to
will be displayed towards
the bottom of the
Method 2 Category Drill Down: More time consuming than above method but
has it's use. Use the Category
in the upper left side
on every page) Click
on the Parts Dept > Ken-Bar Parts this will display the Parts Categories.
Choose the proper Parts
Category that encapsulates
your part #. Click on the part (link) you need and a "Add
to Cart" button will
be displayed towards
the bottom of the items
|This product was added to our catalog on 09/16/2005.
Try searching for: font colorsilverken d811 gocart