Ken-Bar 13hp Utility Go Cart Complete details and specs below...

---Compliment text coming soon!---

Utility Go-Kart Specs Engine Tecumseh OHV 13 engine/single cylinder Displacement 357.6 cc/13 hp Rotary oil pump Automotive style replacement oil filter Automotive style pleated paper air filter Cast Iron cylinder sleeve EPA and CARB approved Muffler with spark arrester 2 year warranty Drive System Tecumseh/Peerless 820 transaxle 5 speed forward and reverse / 1st gear double low 1"" axles All ball bearing supports Steel cut gears Cast aluminum case/sealed and lubed for Life Top speed approximately 18 mph 90 day warranty Tires Front tire diameter: 20" Rear tire diameter: 22" Front tires: 20 x 700 x 8" ATV Rear tires: 22 x 1100 x 10" ATV Frame All jig welded heavy duty square stock frames for accuracy Finish baked - on polyurethane powder coat Dimensions Wheelbase: 70" Frame to Ground Clearance: 8" Turn Radius: 10' Length: 101" Width: 48" Cargo bed: 48"L x 33"W x 8"D / 7.33 cu. ft. Weight 695 lbs Available Colors GREEN | RED Utility Go-Kart Features 13 HP Powerful Tecumseh Engine Manual shift 5 speed Two passenger 750 pounds total capacity Manual dump Brush bars Double seating with seatbelts Rack-N-Pinion steering Box steel front axle Coil over shock front suspension ABS high impact body Dual headlights 12 volt electric start Manual dump bed Dual rear brakes Parking brake Powder coated poly paint Cup holders Jig welded square steel tube chassis Standard features found on all Ken-Bar Go-Carts All jig welded frames for accuracy! All ball bearing axles for long life! Powder paint for durability and finish! Seat belts on all vehicles! Brush Bars standard on all models Foam covered brush bars on most models Engines by Tecumseh! Torque converter by Comet! Clutches by Max-Torq! Utility Go-Kart Notes • Unit comes 95% pre-assembled. Very minor assembly only, usually way less than an hour with normal household tools. Please read and understand your owners & safety manual, view your safety video tape (included) and then get ready for some major fun! • Speed and range specs are averaged, your ratings & experience may differ slightly. Warning! Go-Karts & Mini-Bikes can be hazardous to operate. Failure to understand and follow Warnings and Instructions for the safe use and maintenance of this product may result in Death or Injury! For your safety: Always wear an approved helmet, eye protection and protective clothing. Avoid stationary objects and obstacles that create the potential for collision. Avoid excessive speed and be particularly careful on difficult terrain. Never carry passengers. Never engage in stunt riding, jumping, or operate the vehicle under the influence of drugs or alcohol. Go-Karts & Mini-Bikes are for off road use only! Competent adult supervision is recommended when children are operating the vehicle. Check state and local laws for legal operation. Read Operator’s Manual and watch Safety Video. Go-Karts R us assumes no responsibilities or liabilities from the use or mis-use of this or any of our listings sold on this site. Use of this vehicle with age requirements is listed above in the items listing. Ken-Bar Go-Carts & Mini-Bikes comply with all standards for safety and performance per ANSI/SVIA-2001. Warranty & Parts Kart Parts Ken-bar Manufacturing warrants to the original purchaser of its Go-Karts or Mini-bike, that if any part or parts (except engine) prove to be defective in materials and/or workmanship within 90 days. Bearing, wheel hubs, rims, chains, tie rod ends, steering spindles, throttle and brake pedals, brake drums and brake bands. No warranty on belts, clutches, throttle cables, worn out tires, and bent axles. One year warranty on frame breakage. Wrecked or abused, no warranty. Phone Ken-bar Mfg. for authorization to do the repair work. Retail customer must pay freight charge on parts to our plant and return. This warranty does not apply to any part, which is of the opinion of Ken-bar Mfg. Co., that rendered defective due to improper maintenance, improper assemble, alterations, abuse, negligence or accident. Warranty registration cards must be returned to Ken-bar. We will not honor a claim unless the card is mail to us within 10 days of purchase of Kart or Mini-Bike. Customer must view video after purchasing vehicle and put code number at end of video onto the registration card. To Order Ken-Bar Parts: You will need to use your breakdown illustration manual that came with your Ken-Bar machine (or if you don't have one simply download your Ken-Bar parts manual in our Ken-Bar Parts Manual Directory Listing). Once you have found the part #(s) you need within your parts manual... Method 1 Direct Search: Type the part# into the search box (located on every page in the left side boxes) and then hit Enter on your keyboard (or click on the icon next to the search box). This will bring up the part or if more than one part starts with that string, a choice will be displayed. Click on the part (link) you need and a "Add to Cart" button will be displayed towards the bottom of the items listing. Method 2 Category Drill Down: More time consuming than above method but has it's use. Use the Category box (located in the upper left side on every page) Click on the Parts Dept > Ken-Bar Parts this will display the Parts Categories. Choose the proper Parts Category that encapsulates your part #. Click on the part (link) you need and a "Add to Cart" button will be displayed towards the bottom of the items listing.